B&R 4B1250.00-490 Panelware

Some of our hardware is showcasing itself here looking for a new loving home to relocate to. Keep your eye on the Box of Tricks section on our Products Page for brand categorization of parts for sale.
Want to talk to us?
CONTACT 2M

B&R 4B1250.00-490 Panelware

B&R, 4B1250.00-490, PANELWARE - Rev.C0

Part number:

4B1250.00-490

Description:
PANELWARE compact HMI, white Intelligent HMI, 32 KB EEPROM LC display, 4 x 20 characters background lighting 12 numerical keys + 12 function keys 1 RS232 interface IP65 front protection.

B&R 4B1250.00-490 Panelware

DATASHEETS

Interface:  RS232 (not electrically isolated).

Control:  Pictures created with PANELWARE Configuration Software (V1.71 and higher), application stored in Compact HMI (32 kBytes EEPROM, max. 250 pictures). Controlled using ESC sequences (no memory in the P121).

Supply:  5.2 VDC (min. 5.0 VDC, max. 5.5 VDC).

Keypad: 12 function keys with legend strips ,12 key number block.

Temperature Operating Storage:  0 to 50 °C (32 to 122 °F) -20 to 60 °C (-4 to 140 °F.

Relative Humidity Operating Storage:  10 to 90 % (non-condensing).

Shock: Conforms to IEC 60068-2-27, 15g equivalent, 150 m/sec2, 11 msec, 3 axes (pos and neg).

Vibration: Conforms to IEC 60068-2-6, 1g equivalent, 10-58 Hz; 0.075 mm, 58-150 Hz; 9.8m/sec2, 20 Cycles per axis.

Current Requirements: 340 mA at 5.2 VDC.

B&R 4B1250.00-490 Panelware

Resale Value

RS232 Interface:  A 9 pin D-type male connector can be found on the back of the COMPACT MMI.

Attention: The panel is not electrically isolated. All interface signals refer to ground!

Supply Voltage:  The panel is supplied through pins 4 and 5 (or 6 or 9) of the 9 pin D-type (M) connector.

The power supply must match the following specifications:
Voltage: typ. 5.2 V (min. 5 V, max. 5.5 V)
Current: 340 mA
Temperature Coefficient: max. 1 mV/°C
Ripple: max. 50 mV

Operating Mode Switch (only P125):
This switch is only found on the COMPACT MMI P120 and not on the P121. Switching between "Teach Mode" and "Run Mode" is done with this switch.

Teach Mode (Position 2)
In this mode of operation, a project created with the PANELWARE Configuration Soft-ware can be transferred from a PC to the P120. If the P120 is switched on in this mode of operation, the text "TEACH-MODE WAITING FOR DATA" is displayed on the display.

Run Mode (Position 1)
If the P120 is switched on in this mode of operation, the project which has been downloaded to the panel is started.

Prices appear to range between £171 to £348 for this unit second-hand and depending on condition.